|
Product Details:
|
| Structure: | Vertical Injection Molding Machine | Usage: | Electric Parts |
|---|---|---|---|
| Machine Weight:: | 1.2T | Clamping Force:: | 20KN |
| Space Between Tie Bar: | 305*205mm | Pump Motor Power: | 5.5KW |
| High Light: | vertical hydraulic injection moulding machine,vertical screw type injection moulding machine |
||
t saves power by 30%~60%.A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides, the low oil temperature will prolong the service life of sealing elements.
Oil temperature rise slowly
The system can restrain arising of oil temperature, so smaller oil cooling system can be used in the machine.
Low noise
Different from ordinary fixed pump injection molding machine, servo power-saving injection molding machine is working only when necessary. And working noise is less than LOG-A8 series, will be much quieter for your working area.
Close loop barrel temperature control
Clamping unit
Five point double tiggle clamping unit
Electronic ruler for mold open and close position
Mechanical safety device
Multi stage of mold open /close speed, pressure and position
Fast mold close
Automatic mold height adjustment
Low pressure mold protection
Box model platen: T slots
Auto centering lubrication system
Hydraulics
Propoffional pressure and speed control
Oil suck filter
Oil temperature control and alarm
By-pass oil filter
2.3 Adopting graphite bush, improving the wear-resistance, reducing the frequency of using lubrication oil effectively improve the cleanness of the injection part.
2.4 Injection cylinder adopts low-frictional seals, improving the response rate and improve the stability under the complicated processes of injection.
2.5 Bridge-style design, for different L/D plastic parts.
| Model |
Units
|
JYT-200-D(DM) |
||
Injection system |
Screw Diameter |
mm |
36 |
42 |
| Injection Pressure |
Kg/cm2 |
1732 |
1266 |
|
| Theoretical Shot Volume |
cm3 |
182 |
249 |
|
| Max. Shot Weight(P.S) |
g/Oz |
162/5.7 |
222/7.8 |
|
| Injection Rate |
cm3/sec |
87 |
119 |
|
| Temperature Control Zone |
ZONE |
4 |
||
| Material Hoppper Capacity |
L |
30 |
||
| Clamping System |
Clamping Force |
T |
70 |
|
| Opening Force |
T |
9.6 |
||
| Distance Between Tie Bars |
mm |
500×340 |
||
| The Biggest Mold Contain Space |
mm |
490×330 |
||
| Min Mold Height |
mm |
200 |
||
| Opening Stroke |
mm |
250 |
||
| Max. Open Daylight |
mm |
450 |
||
| Ejector Force |
T |
2.7 |
||
| Ejector stroke |
mm |
75 |
||
| Sliding System |
Sliding Platen Size |
mm |
- |
|
| Sliding Platen Stroke |
mm |
- |
||
| Round Set Diameter |
mm |
- |
||
| Hydraulic Electric System | Max. Hydraulic Pressure |
Kg/cm2 |
140 |
|
| Pump Output |
L |
210 |
||
| Pump Motor Power |
Kw |
7.5 |
||
| Barrel Heating Power |
Kw |
4.5 |
||
| Total Wattage |
Kw |
12.0 |
||
| Others |
Machine Weight |
T |
2.8 |
|
| Machine Dimensions(LxWxH) |
m |
1.8×1.1×2.7 | ||
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095
