|
Product Details:
|
| Structure: | Vertical Injection Molding Machine | Usage: | Electric Parts |
|---|---|---|---|
| Machine Weight:: | 0.7T | Clamping Force:: | 15KN |
| Space Between Tie Bar: | 320*180mm | Pump Motor Power: | 4KW |
| High Light: | vertical hydraulic injection moulding machine,vertical screw type injection moulding machine |
||
Some of the important features:
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
High energy savings
Under normal operating conditions, compared with conventional
hydraulic injection molding machines, energy savings of 20-80%
can be achieved.
Quiet operation
The machine runs at much lower noise levels, particularly in low speed applications.
15. Better oil temperature stabitily
The servo system only delivers hydraulic oil as it is needed for the various functions. This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
Characteristic
The machine use the high-performance servo dynamic control system, the oil pump as the power source, having the characteristics as follow: high response,saving energy, low noise, high-control precision, and have the breakthrough in the prefect connection of the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than that of variable displacement pump and 70% less than that of fixed displacement pump, save the cost effectively.t saves power by 30%~60%.A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides, the low oil temperature will prolong the service life of sealing elements.
| Model |
Units
|
JYT-4S-D(DM) |
||
Injection system |
Screw Diameter |
mm |
36 |
42 |
| Injection Pressure |
Kg/cm2 |
1732 |
1266 |
|
| Theoretical Shot Volume |
cm3 |
182 |
249 |
|
| Max. Shot Weight(P.S) |
g/Oz |
162/5.7 |
222/7.8 |
|
| Injection Rate |
cm3/sec |
87 |
119 |
|
| Temperature Control Zone |
ZONE |
4 |
||
| Material Hoppper Capacity |
L |
30 |
||
| Clamping System |
Clamping Force |
T |
70 |
|
| Opening Force |
T |
9.6 |
||
| Distance Between Tie Bars |
mm |
500×340 |
||
| The Biggest Mold Contain Space |
mm |
490×330 |
||
| Min Mold Height |
mm |
200 |
||
| Opening Stroke |
mm |
250 |
||
| Max. Open Daylight |
mm |
450 |
||
| Ejector Force |
T |
2.7 |
||
| Ejector stroke |
mm |
75 |
||
| Sliding System |
Sliding Platen Size |
mm |
- |
|
| Sliding Platen Stroke |
mm |
- |
||
| Round Set Diameter |
mm |
- |
||
| Hydraulic Electric System | Max. Hydraulic Pressure |
Kg/cm2 |
140 |
|
| Pump Output |
L |
210 |
||
| Pump Motor Power |
Kw |
7.5 |
||
| Barrel Heating Power |
Kw |
4.5 |
||
| Total Wattage |
Kw |
12.0 |
||
| Others |
Machine Weight |
T |
2.8 |
|
| Machine Dimensions(LxWxH) |
m |
1.8×1.1×2.7 | ||
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095
