|
Product Details:
|
| Shot Size: | 6443cm3 | Injection Weight: | 5798 Grams |
|---|---|---|---|
| Injection Pressure: | 170Mpa | Injection Rate: | 867rgams |
| Ejector Tonnage: | 215KN | Pump Motor Power: | 55+55KW |
| Heating Power: | 85.25KW | Oil Tank Capacity: | 2400L |
| High Light: | thermoset injection molding machine,servo motor injection molding machine |
||
All electricBakelite injection molding machine shot size theoretical 5414 lnjection weight 4872g
1) Differential high speed clamping
2) Centralized lubrication system
3) Low pressure mould protection device
4) Mechanical safety interlock
6) Double electrical safety interlock
7) Oil return filter
8) Oil tank with inner stainless steel container
| njection Unit | A B |
| Screw Diameter mm | 110 120 |
| Screw L/D Ratio L/D | 26.2 24 |
| Shot Size (Theoretical) cm3 | 5414 6443 |
| Injection Weight (PS) g | 4872 5798 |
| Injection Rate g/s | 793 867 |
| Injection Pressure Mpa | 205 170 |
| Screw Speed rpm | 90 |
| Clamping Unit | |
| Clamp Tonnage KN | 13900 |
| Toggle Stroke mm | 1300 |
| Space Between Tie Bars mm | 1310x21200 |
| Max.Mold Height mm | 1100 |
| Min.Mold Height mm | 1250 |
| Ejector Stroke mm | 550 |
| Ejector Tonnage KN | 325 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | , 55+55 |
| Heat Power KW | 85.25 |
| Machine Dimension m | 13.1x3.0x3.2 |
High machinery strength:products are strengthened by glass fiber to greatly improve its machinery strength,compared with other thermoset engineering plastics
Color preformance:Any color can be adjusted and produced,no baking finish is used again.It has fresh and real color closing to perfection
Processing preformance: it has stable size shrinkage,high precision smooth and beautiful surface.It can be proecessed by plastic injection Molding Machine,Mold compression molding machine and multi-station plastic injection molding machine
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095
