Product Details:
|
Structure: | Horizontal Injection Molding Machine | Usage: | Electric Parts |
---|---|---|---|
Machine Weight:: | 21.5T | Clamping Force:: | 5800KN |
Space Between Tie Bar: | 850*820mm | Pump Motor Power: | 55KW |
Highlight: | plastic moulding machine,automatic injection moulding machine |
Shoes Storage Plastic Box Injection Molding Machine Recycled Plastic Shoes Mould Production
he role of the injection system: the injection system is one of the most important components of the injection molding machine, generally there are three main forms of plunger type, screw type, screw pre-plastic plunger injection type. The most widely used is the screw type. The function is that, in a cycle of the injection molding machine, a certain amount of plastic can be plasticized and plasticized in a predetermined time, and the molten plastic is injected into the mold cavity through the screw at a certain pressure and speed. After the injection is completed, the melt injected into the cavity is kept set.
Composition of the injection system: The injection system consists of a plasticizing device and a power transmission device.
The plasticizing device of the screw type injection molding machine is mainly composed of a feeding device, a barrel, a screw, a glue assembly and a nozzle portion. The power transmission device includes an injection cylinder, an injection base moving cylinder, and a screw drive device (melt motor).
The role of the clamping system: The function of the clamping system is to ensure that the mold is closed, opened and ejected. At the same time, after the mold is closed, the mold is supplied with sufficient clamping force to resist the cavity pressure generated by the molten plastic entering the cavity, preventing the die from being slit, resulting in a bad condition of the product.
The composition of the clamping system: the clamping system is mainly composed of a clamping device, a machine clamping, a mold adjustment mechanism, an ejection mechanism, a front and rear fixed template, a moving template, a clamping cylinder and a safety protection mechanism.
The heating system is used to heat the barrel and the injection nozzle. The heating system is used to heat the barrel and the injection nozzle. The barrel of the injection molding machine generally uses a heating coil as a heating device, is installed outside the barrel, and is separated by a thermocouple.
Segment detection. The heat is provided by the heat conduction of the tube wall to provide heat source for plasticizing the material; the cooling system is mainly used to cool the oil temperature, and the oil temperature is too high, which may cause various faults, so the oil temperature must be controlled.
Another location that needs to be cooled is near the feed opening of the feed pipe to prevent the raw material from melting at the feed opening, resulting in the raw material not being properly cut. The plastic machine barrel generally uses an electric heating coil as a heating device, is installed outside the barrel, and is detected by a thermocouple segment.
The heat is provided by the heat conduction of the tube wall to provide heat source for plasticizing the material; the cooling system is mainly used to cool the oil temperature, and the oil temperature is too high, which may cause various faults, so the oil temperature must be controlled. Another location that needs to be cooled is near the feed opening of the feed pipe to prevent the raw material from melting at the feed opening, resulting in the raw material not being properly cut.
SPECIFICATION | HJF-580 | ||||
A | B | C | D | ||
Screw Diameter | Mm | 80 | 85 | 90 | 95 |
Screw L/D Ration | L/D | 22 | 20.9 | 19.8 | 18.6 |
Shot Size(Theoretical) | cm3 | 2210 | 2495 | 2797 | 3117 |
Injection Weight(PS) | g | 1989 | 2245 | 2517 | 2800 |
Injection Rate | g/s | 430 | 495 | 550 | 602 |
Injection Pressure | MPa | 195 | 180 | 160 | 148 |
Screw Speed | rpm | 150 | |||
Clamp tonnage | KN | 5300 | |||
Opening stroke | Mm | 850 | |||
Space Between Tie Bars | mm | 850*820 | |||
Max.Mold Height | mm | 850 | |||
Min.Mold Height | mm | 330 | |||
Ejector Stroke | mm | 230 | |||
Ejector Tonnage | KN | 175 | |||
Max.Pump Pressure | MPa | 16 | |||
Pump Motor Power | KW | 55 | |||
Heater power | KW | 34 | |||
Machine Dimension(L*W*H) | M | 8.7*2.10*2.76 | |||
Machine weight | T | 21.5 | |||
Oil Tank Capacity | L | 900 |
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095