Product Details:
|
Structure: | Horizontal Injection Molding Machine | Usage: | Electric Parts |
---|---|---|---|
Machine Weight:: | 37T | Clamping Force:: | 7800KN |
Space Between Tie Bar: | 980*950mm | Pump Motor Power: | 37+30KW |
Highlight: | plastic moulding machine,automatic injection moulding machine |
nylon cable tie injection molding machine self locking manufacturers strip for sale wire nails mould production line
1.Optimized clamping unit provides lower energy consumption and faster movements for reduced cycle times.
2.The redesigned toggle kinematics for higher efficiency and lower energy consumption for small and large machines.
3.The redesigned clamping unit providing lower platen stress and higher mold force stability, reducing mold wear and improving molded product stability.
4.Fixed platen with centralized force loading and less platen flexing. Redesigned moving platen providing centralized force distribution from the toggle system to the mold. The result: higher rigidity and stability.
5.Providing better lubrication and lower lubrication consumption. A smooth operation leads to longer lifetime of the clamp. Less maintenance required.
6.Due to new toggle design with optimized kinematics.
Take 200-ton clamping unit for example
Vm: Moving speed of movable platen
Vo: Moving speed of oil cylinder
The rigid one-piece injection base supports the common slide rail for injection and screw movements.
Highly optimized servo-hydraulic technology, with improved efficiency for lower energy consumption.
The technologically matured Jupiter II Series convinces not only with rapid, smooth mold movements and its highly economical energy consumption. The latest upgrade to the Jupiter - called “Plus” - has brought significant additional improvements.
10.FOUR SHORT STROKE MOLD BREAK CYLINDERS
For accurate mold height control with closed loop position feedback, ensures the mold is clamped with parallel movement.
The Hydraulic Units
High efficiency, Energy-saving and high precise proportional pressure and flow variable displacement pump system make the out of the hydraulic system matching the required power for entire machine operation without loss of high pressure throttle and overflow energy. As comparedwith constant displacement pump, it saves power by 30%~60%. A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides, the low oil temperature will prolong the service life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to ensure steady mold opening and clamping operation without any impact.Besides, differential mold clamping operation is fitted to ensure high production efficiency.
SPECIFICATION | HJF-780 | ||||
A | B | C | D | ||
Screw Diameter | Mm | 90 | 95 | 105 | 110 |
Screw L/D Ration | L/D | 23.2 | 22 | 19.9 | 19 |
Shot Size(Theoretical) | cm3 | 2924 | 3258 | 3981 | 4369 |
Injection Weight(PS) | g | 2632 | 2933 | 3583 | 3932 |
Injection Rate | g/s | 574 | 640 | 781 | 858 |
Injection Pressure | MPa | 195 | 175 | 143 | 130 |
Screw Speed | rpm | 115 | |||
Clamp tonnage | KN | 7800 | |||
Opening stroke | Mm | 950 | |||
Space Between Tie Bars | mm | 980*950 | |||
Max.Mold Height | mm | 960 | |||
Min.Mold Height | mm | 400 | |||
Ejector Stroke | mm | 280 | |||
Ejector Tonnage | KN | 186 | |||
Max.Pump Pressure | MPa | 16 | |||
Pump Motor Power | KW | 37+30 | |||
Heater power | KW | 56.7 | |||
Machine Dimension(L*W*H) | M | 11.43*2.40*3.14 | |||
Machine weight | T | 37 | |||
Oil Tank Capacity | L | 1500 |
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095