Product Details:
|
Voltage: | Customed Avaiable | Used For: | Plasic Products |
---|---|---|---|
Motor: | Servo & Standard & Variable Pump | Keyword: | Energy Saving |
Warranty: | 18 Months | Plastic Type: | Thermoplastic |
Certification: | CE ISO9001 | ||
Highlight: | plastic injection molding equipment,automatic injection moulding machine |
A injection molding: Plastic material is heated to melt in the heating cylinder injection molding machine, and then pushed by the reciprocating screw will melt to a method for closing a mold cavity in the molding. It not only can be obtained with high accuracy at high productivity, high-quality products, and processed plastic varieties, yield (about 1/3 of the total plastic) and versatile, therefore, is a plastic injection molding process important one molding method.
B Extrusion: extrusion in an extruder by heating, pressurizing fluid state continuously leaving the plastic through a die molding method. Generally used for sheet. Pipe. Monofilaments. Biansi. film. Wire and cable coating and the like molding, wide use. High yield. Therefore, it is an important one plastics molding method.
C foam molding: refers to the foam blowing agent added to the appropriate produce porous or bubble products – adding foamed article having a relatively low density, high strength, and raw materials with less noise, heat insulation V point, the foam material PVC, PE, and PS. Products include: film, sheet, tubing, and profiles. Foam can be divided into chemical foaming and physical foaming.
SPECIFICATION | HJF-140 | |||
A | B | C | ||
Screw Diameter | Mm | 38 | 42 | 45 |
Screw L/D Ration | L/D | 22.1 | 21.6 | 19.5 |
Shot Size(Theoretical) | cm3 | 215 | 263 | 302 |
Injection Weight(PS) | g | 193 | 236 | 271 |
Injection Rate | g/s | 94 | 105 | 135 |
Injection Pressure | MPa | 205 | 159 | 140 |
Screw Speed | rpm | 0~220 | ||
Clamp tonnage | KN | 1400 | ||
Opening stroke | mm | 380 | ||
Space Between Tie Bars | mm | 420*420 | ||
Max.Mold Height | mm | 450 | ||
Min.Mold Height | mm | 170 | ||
Ejector Stroke | mm | 120 | ||
Ejector Tonnage | KN | 33 | ||
Max.Pump Pressure | MPa | 16 | ||
Pump Motor Power | KW | 13 | ||
Heater power | KW | 7.2 | ||
Machine Dimension(L*W*H) | M | 4.5*1.2*1.7 | ||
Machine weight | T | 4.2 | ||
Oil Tank Capacity | L | 230 |
Contact Person: Mr. Michael
Tel: 0086-18658255281
Fax: 86-574-88396095