Contact Us

Contact Person : Michael

Phone Number : 0086-18658255281

WhatsApp : +008618658255281

Free call

High Performance Plastic Mold Making Machine HJF80 Ton For Plasic Products

Minimum Order Quantity : 1 set Price : Negotiation
Packaging Details : Standard Export Package for Injection Machine Delivery Time : 20-30days
Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram Supply Ability : 100 Set/Sets per Month
Place of Origin: CHINA Brand Name: HAIJIA
Certification: CE ISO9001 Model Number: HJF80

Detail Information

Voltage: Customed Avaiable Used For: Plasic Products
Motor: Servo & Standard & Variable Pump Keyword: Energy Saving
Warranty: 18 Months Plastic Type: Thermoplastic
Certification: CE ISO9001
High Light:

all electric injection molding machines

,

plastic products making machine

Product Description

 

The shrinkage problem of hard rubber parts (surface concave shrinkage and internal shrinkage) is caused by the defect that the space left by the concentrated shrinkage can not be adequately supplemented by the melt from the direction of the inlet when the melt is cooled and contracted. Therefore, factors that are not conducive to the subsidy will affect us to solve the problem of shrinkage.

 

Most people know that die temperature is too high to cause shrinkage problems, usually like to reduce the temperature of the die to solve the problem. But sometimes if the die temperature is too low, it is not conducive to solve the shrinkage problem, which is not noticed by many people.

Mold temperature is too low, melt glue cooling is too fast, slightly thicker glue level is far from the water inlet. Because the middle part is cooled too fast, the shrinkage channel is blocked and the melt glue can not be adequately supplemented in the distance, which makes the shrinkage problem more difficult to solve. The shrinkage problem of thick injection parts is particularly prominent.

 

Moreover, too low die temperature is not conducive to increase the overall shrinkage of injection parts, so that the concentrated shrinkage increases, shrinkage problem is more serious.

Therefore, when solving the difficult shrinkage problem, it is good to remember to check the die temperature. Experienced technicians usually touch the surface of the die cavity with their hands. Each material has its appropriate die temperature. For example, the shrinkage of PC material will be improved if the hole is properly pressed, but if the die temperature is too high, the shrinkage of injection parts will occur.

 

 

High Performance Plastic Mold Making Machine HJF80 Ton For Plasic Products 0

You Might Be Into These
Get in touch with us

Enter Your Message

haijia@china-haijiang.com
+008618658255281
haijiamc