Haijia Injection Machine,Energy Saving More

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsPET Preform Injection Molding Machine

Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth

Certification
Good quality Bakelite Injection Molding Machine for sales
Good quality Bakelite Injection Molding Machine for sales
Haijiang injection molding machine good quality ,but price is better than Bole and Haitian. It is good choice

—— Muhammad Khali

I'm Online Chat Now

Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth

China Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth supplier
Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth supplier Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth supplier

Large Image :  Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth

Product Details:

Place of Origin: CHINA
Brand Name: HAIJIA
Certification: CE ISO9001
Model Number: HJF 240

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: Export Standard Packing
Delivery Time: 20-30days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 100 Set/Sets per Month
Contact Now
Detailed Product Description
Structure: Horizontal Plastic Type: Thermoplastic
Plasticizing Way: Screw Type Clamping Way: Hydraulic & Mechanical
Automation: Automatic Transport Package: Export Standard Packing
HS Code: 8477101090 Clamping Force: 2400KN

1. Treatment of plastics
Because PET macromolecule contains lipid group, it has certain hydrophilicity. Particles are sensitive to water at high temperature. When the moisture content exceeds the limit, the molecular weight of PET decreases and the products become colored and brittle.
Therefore, before processing, the material must be dried, its drying temperature is 150 C, more than 4 hours; generally 170 C, 3-4 hours. It can be used to check whether the material is completely dry. The proportion of recycled PET bottle blank should not exceed 25%, and the recycled PET bottle blank should be thoroughly dried.

2. Selection of Injection Molding Machine
Because of the short time of stabilization after melting point and the high melting point of PET, the injection system with more temperature control section and less self-friction heat generation during plasticization should be selected, and the actual weight of the product (water-containing orifice) should not be less than 2/3 of the injection volume of the machine.

3. Mould and gate design
PET bottle embryo is usually formed by hot runner mould. It is better to have a heat insulation plate between the mould and the injection machine template. The thickness of the heat insulation plate is about 12 mm, and the heat insulation plate must be able to withstand high pressure. Exhaust must be sufficient to avoid local overheating or fragmentation, but the exhaust outlet depth should not exceed 0.03mm, otherwise it is easy to produce flash.

4. Melt temperature
It can be measured by air irradiation method, ranging from 270 to 295 degrees C, and the enhanced grade GF-PET can be set to 290 to 315 degrees C.

5. Injection speed
Generally, the injection speed should be fast to prevent premature coagulation during injection. But too fast and high shear rate make the material fragile. The projectile is usually completed in 4 seconds.

6. Back pressure
The lower the better, so as not to wear. Usually not more than 100 bars, usually do not need to use.

7. Residence time
Do not use too long detention time to prevent the molecular weight from decreasing, and try to avoid the temperature above 300 C. If the shutdown time is less than 15 minutes, only air-jet treatment is required; if it is more than 15 minutes, it should be cleaned with viscous PE, and the barrel temperature should be lowered to PE temperature until the machine is restarted.

8. Notes
(1) Recycled materials should not be too large, otherwise, it is easy to "bridge" at the discharging site and affect plasticization;
(2) If the mould temperature is not well controlled or the material temperature is not properly controlled, it is easy to produce "white fog" and opaque; if the mould temperature is low and uniform, the cooling speed is fast and the crystallization is small, the product is transparent.

Screw Type Thermoplastic Injection Molding Machine For Pet Preform Wide Mouth

Contact Details
Ningbo haijiang machinery manufacturing co.,Ltd

Contact Person: Camile

Send your inquiry directly to us (0 / 3000)