all electric injection molding machines online manufacture

Die positioning hole diameter 80~100 125~250 315 or more Coaxiality of nozzle and positioning hole of die is less than 0.25 less than 0.30 less than 0.40 Adjustment method: (1) This project should be carried ... Read More

Screw is the key component in plasticized parts, which is in direct contact with plastics. Plastics through the effective length of the screw groove has a long thermal history. It has to undergo the transformat... Read More

In the injection process, the main purpose of controlling the temperature of the mould is to heat the mould to the working temperature, and the second is to keep the temperature of the mould constant at the ... Read More

Double-loop control system is used in the case of different temperature needed for the dynamic and fixed template of the die. According to the different temperature requirements of the two templates, the ... Read More

To solve the shrinkage problem, the first thing to think about is to increase the injection pressure and prolong the injection time. But if the injection speed has been adjusted very fast, it is not conducive ... Read More

The temperature distribution in the cavity has a great influence on the deformation and internal pressure of the part. Reasonable setting of cooling passage can reduce the internal pressure and improve the ... Read More

The power supply line connecting the power cable to the electric box is three-phase five-wire with a voltage of 380V and a frequency of 50Hz. The machine must be grounded. After the power is connected, the ... Read More

When installing the machine, it is necessary to confirm the various environmental conditions. If the conditions are not met, erroneous actions may occur, damage the machine and reduce the service life of the ... Read More

All electricBakelite injection molding machine shot size theoretical 5414 lnjection weight 4872g 1) Differential high speed clamping 2) Centralized lubrication system 3) Low pressure mould protection device 4) ... Read More

Servo Injection molding Machines Features 1. High energy savings Under normal operating conditions, compared with conventional hydraulic injection molding machines, energy savings of 20-80% can be achieved. 2. ... Read More